MotoCrane RADICAL Error 029: Lift Motor Command Timeout
The lift driver is not getting commands from the Controller. The Controller is the most likely cause, and a power cycle often clears it. If it does not, the Controller may be damaged.
Error: red icon, repeated beeps until acknowledged. Fix before you continue.
What to do
- Power cycle the system.
- Check every cable connection.
- With the system disarmed, open the Diagnostics page and move the lift joystick to see if motor commands register.
First, always: check every cable and the COM and Power LEDs on each module. Axis: lift. Applies to MotoCrane RADICAL.
Code 029 on ULTRA is different: ULTRA Error 029: Lift Motor Command Timeout.
Print the RADICAL code card (PDF)