MotoCrane TITAN LTB Specs, Manuals and Field Guide
Broadcast version of TITAN LT with Ethernet and fiber passthrough.
What it is
LTB is the broadcast variant of TITAN LT. The pan slipring adds 100Mbit Ethernet and fiber channels on top of 3G-SDI, and it pairs with the SLC for native Canon and Fujinon servo lens control.
It keeps the 3-channel motor driver for Preston, Heden, Redrock and MotoCrane lens motors, has axis locks on all 3 axes in 90 deg steps, and comes in a black anodized finish. Power and COM connections match LT.
TITAN LTB specs
| Max payload | 40 lbs / 18 kg |
|---|---|
| Dry weight | 18 lbs / 8.1 kg |
| Max operational speed | 130+ mph |
| Pan / roll / tilt range | Unlimited 360 deg / 455 deg (+-225) / 270 deg (+-135) |
| Max pan torque and speed | 10 Nm, 360 deg/s |
| Weather and temp | IP65, -30 F to 120 F |
| System voltage | 48V (42 to 53VDC) |
| Comms | CAN-BUS hardwired, 2.4GHz wireless, 900MHz with LongWave |
| Power out (spec table) | 3x 14.4V 2-pin LEMO plus 1x 26V, 250W combined |
| Slipring | 3G-SDI, 100Mbit Ethernet, fiber |
| Lens driver | 3-channel, digital 7-pin LEMO, Canon and Fujinon with SLC |
Specs as published by MotoCrane: motocrane.com/ltb. Specs MotoCrane does not publish are left out.
Guides for TITAN LTB
Sources from MotoCrane
Troubleshooting finder: what is happening?
- MotoCrane TITAN LTBProduct
- How to balance a MotoCrane TITAN LTHow-to
- MotoCrane TITAN LT power-on, Safe Arm and Quick BootHow-to
- MotoCrane TITAN LT tuning: presets and common symptomsTroubleshooting
- MotoCrane TITAN LT drift, calibration and gimbal lockTroubleshooting
- MotoCrane Update Tool not finding a device or failingTroubleshooting
- Field card: TITAN LT setup, balance and tuning (PDF)Field card
- Field card: MotoCrane Update Tool (PDF)Field card